 |
 |
 |
 |
 |
 |
 |
NexTurn Model SA-32B |
|
The SA-32B comes equipped ready to go with items such as full 7 axis simultaneous capability, 9 driven tools, up to 18 tools total, full C Axis (.001 degrees) on both the main and the sub spindle, Fanuc Servo Motors and electronics thruout. The Fanuc 0i-TD Control is provided with all software features needed to make your NexTurn machine productive right out of the box. We offer barfeeders and the interface for all the major manufacturers including LNS, IEMCA, FMB, MTA. Check out NexTurn today ... our low cost investment and high productivity will provide a positive impact your bottom line. |
 |
Tool Layout: |
|
|
|
MODEL SPECIFICATIONS
Machining Capacity
|
Description |
Specification |
Comments |
Max. Bar Diameter |
32 mm |
||
Max. Turning Length |
210 mm |
Option: 250 mm |
|
Max. Drilling / Tapping on Main Spindle |
12 mm / M10 |
||
Max. Sub Spindle Chucking Diameter |
32 mm |
||
Max. Drilling / Tapping on Sub Spindle |
10 mm / M8 |
||
Max. Drilling / Tapping on Cross Slide |
10 mm / M8 |
||
Max. Key Cutter Diameter on Cross Slide |
40 mm |
||
Machining Capability |
Max. Main Spindle Speed |
8,000 RPM |
|
Max. Sub Spindle Speed |
8,000 RPM |
||
Max. Cross Spindle Speed |
6,000 RPM |
||
Total # of Tools |
18 |
23 - Optional Spec. |
|
Number of Turning Tools / Cross Live Tools / Y Axis ID |
5 / 4 / 5 |
Option: 5 on Y Axis ID |
|
Number of Back-end Face Tools |
4 Fixed |
Option: 2 or 3 Live |
|
Turning Tool Shank Size |
16 x 120mm |
||
Rapid Traverse |
24 m / min. |
1260 ipm |
|
Number of Controllable Axes |
7 |
||
Main Spindle Positioning |
.001 degree |
Disc Brake |
|
Sub Spindle Positioning |
.001 degree |
Disc Brake |
|
Motors |
Main Spindle |
5.5 / 7.5 kw |
cont. / 30 min. |
Sub Spindle |
1.5 / 2.2 kw |
cont. / 30 min. |
|
Cross Drill / Mill Unit |
.1.0 kw |
||
Rotary Guide Bushing Drive |
Spline Shaft |
||
Back-end Face Tools |
1.0 kw |
||
Coolant Pump Unit |
.45 kw |
||
Lubrication Pump Unit |
.04 kw |
||
Dimensions |
Coolant Capacity |
200 L |
53 Gal. |
Spindle Center Height |
1,000 mm |
||
Length / Width / Height |
2,030 / 1,120 / 1620 mm |
||
Net Weight |
3000 kg |
6,600 lbs |
|
Control |
Fanuc 0i-TB |
||
Available Options |
Front Side Face Rotary Tools - 3 or 4 Spindles |
||
| Back Side Face Rotary Tools - 2 or 3 Spindles | |||
Fixed Type Guide Bushing Holding Unit |
|||
Long Parts Discharge Unit |
|||
Cut Off Detection |
|||
| Polygon Attachment | |||
| Bar Feed Unit | |||
| Modular Back Working Rotary Spindles (ER-11) | |||
| Modular Cross Working Rotary Spindles (ER-11) | |||
| Chip Conveyor | |||
| Mist / Smoke Filter Unit |
©2010 TMT Swiss, LLC - All Rights Reserved.