 |
 |
 |
 |
 |
 |
 |
NexTurn Model LP-18D |
|
The LP-18D comes equipped ready to go with items such as full 4 axis simultaneous capability, up to 18 tools total, Fanuc Servo Motors and electronics thruout. The Fanuc 0i-TC Control is provided with all software features needed to make your NexTurn machine productive right out of the box. We offer barfeeders and the interface for all the major manufacturers including LNS, IEMCA, FMB, MTA. Check out NexTurn today ... our low cost investment and high productivity will provide a positive impact your bottom line. |
 |
|
|
MODEL SPECIFICATIONS
Machining Capacity
|
Description |
Specification |
Comments |
Max. Bar Diameter |
18 mm |
||
Max. Turning Length |
160 mm |
||
Max. Drilling / Tapping on Main Spindle |
10 mm / M8 |
||
Max. Sub Spindle Chucking Diameter |
18mm |
||
Max. Drilling / Tapping on Sub Spindle |
7mm/M6 |
||
Max. Drilling / Tapping on Cross Slide |
7 mm / M5 |
||
Max. Key Cutter Diameter on Cross Slide |
30 mm |
||
Machining Capability |
Max. Main Spindle Speed |
10,000 RPM |
|
Max. Sub Spindle Speed |
8,000 RPM |
||
Max. Cross Spindle Speed |
6,000 RPM |
||
Total # of Tools |
18 |
||
Number of Turning Tools / Cross Live Tools / Y Axis ID |
5 / 3 / 5,5 |
||
Number of Front-end Face Tools |
- |
||
Number of Back-end Face Tools |
|||
Turning Tool Shank Size |
12 x 120mm |
||
Rapid Traverse |
30 (X:15) m/min |
||
Number of Controllable Axes |
4 |
||
Main Spindle Positioning Angle |
1 Degree (Index) |
||
Sub Spindle Positioning Angle |
1 Degree (Index) |
||
Motors |
Main Spindle |
2.2 / 3.7 kw |
. |
Sub Spindle |
.55/1.1 kw |
||
Cross Drill / Mill Unit |
0.5 kw |
||
Rotary Guide Bushing Drive |
|||
Back-end Face Tools |
|||
Coolant Pump Unit |
0.45 kw |
||
Lubrication Pump Unit |
.04 kw |
||
Dimensions |
Coolant Capacity |
150 L |
|
Spindle Center Height |
970 mm |
||
Length / Width / Height |
1700 / 1100 / 1685mm |
||
Net Weight |
1700 kg |
3750 lbs |
|
Control |
Fanuc 0i-TC |
||
Available Options |
Front Side Face Rotary Tools - 3 or 4 Spindles |
||
| Back Side Face Rotary Tools - 2 or 3 Spindles | |||
Fixed Type Guide Bushing Holding Unit |
|||
Long Parts Discharge Unit |
|||
Cut Off Detection |
|||
| Thread Whirling Head | |||
| Polygon Attachment | |||
| Bar Feed Unit | |||
| Modular Back Working Rotary Spindles (ER-11) | |||
| Modular Cross Working Rotary Spindles (ER-11) | |||
| Chip Conveyor | |||
| Mist / Smoke Filter Unit |
©2010 TMT Swiss, LLC - All Rights Reserved.